Can You Install an Oven Yourself

So it is time to install a new electric cooker? Maybe the old oven just died, or you just need to upgrade to the latest model, and you are wondering if you can DIY and save a few coins.

Whatever the reason is, you are reading this article because you are wondering, can you install an oven yourself? Or you have to hire an oven repair technician to help you out? Thank goodness you came to the right place. 

This article will tell you what you need to know and walk you through the process of installing and wiring your oven DIY. 

Yes, You Can Install an Oven Yourself, and Here Is What You Need to Know

Although only a qualified electrician is permitted to install a new circuit for an electric oven, installing an oven is not difficult as long as you know what you are doing. However, there are two main things you should be aware of before you commit to starting this project.

Does Your New Oven Match With the Plug Socket?

You may be thinking that you only need to put your new oven in place and connect to the existing 13 amp power socket. But it is not that simple. First, you need to confirm that the oven is compatible with the already existing socket. 

A 13 amp plug socket can be used for the regular small ovens designed for fitted kitchens. However, your new model is likely more powerful than your old oven, and it might not work if connected to the existing plug. Suppose the new oven is more than 3kW; the existing 13 amp plug will not cut it. 

In this case, your oven will need to be hardwired into a higher-rated dedicated circuit with a separate oven on-off switch. It is not difficult to DIY, but if you are not confident you can do it, it is advisable to let a qualified electrician handle it. 

You Still Need an Electrician

Once you have confirmed that your electric cooker is not more than 3kW and can use the existing 13 amp plug socket, you can go ahead and do the installation yourself. 

However, you will still need to have a qualified electrician to inspect the installation and issue a Minor Electrical Installation Works Certificate.

How to Install Your New Oven

Now that we got that out of the way, let us guide you on installing and plugging your oven into the existing 13 amp socket. 

So here is a step-by-step guide;

  1. Ensure that you have a suitable cable- A cable should have been part of the oven packaging, but if you need to purchase it separately, a 2.5mm cable is recommended. 
  2. Switch off power from the main switch.
  3. Unscrew the plate located at the back of the oven to reveal the terminal outlet box. 
  4. Connect all the wires into the correct position. 
  5. Ensure everything is secure by tightening all the screws and then screw back the plate
  6. Turn on the double pole isolator switch to de-energize the oven.
  7. Once you confirm that the unit is dead, remove the screws from the control unit.
  8. Carefully connect the live, neutral, and earth wires, ensure that the blue neutral is to the left, brown live is to the right, and the green and yellow earth are at the center.
  9. Ensure that the wires are tight enough before you close the outlet box. 


Once you have successfully connected your cooker through the control unit, it is now ready to be plugged in. However, it is advisable to get a qualified appliance repair Northern VA or a technician to check and approve it to ensure that it is safe to use. 

This entry was posted in General Contractor and tagged , , , , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *